Decisions based on feedback

Based on the feedback so far from MCS and Designmaster - these changes are to be made to the Schematic

Changes to make

• Add 10uF Tant Capacitors to "high current" driver devices.
• Convert the 4way output pins to 10way ribbon connectors using a DGND connection for every other pin. That will also allow me to send another clock derivative.
• Add a "clock source select" section - allowing the user to select a 44.1KHz crystal circuit or 48KHz circuit.

Investigation to make

CPLD use for changing settings - how easy can it be? Is it within the grasp of the DIY'er?